Home   »   Electric Blower Heater
Electric Blower Heater
Connection
  • The heater is fitted with three core wire
  • This most be connect to a three pin 15A Plug.
  • Connect the green wire to the thicker pin ( Earth Pin)
  • The hearer most be used on 230AC only ( 50 Hz)
Hear Control
  • The heater has three setting COOL/ WARM / HOT
  • COOL - Air without heat
  • WARM – 1000 watts
  • HOT – 2000 watts

Position

  • The heater can be used any where in the room but like all portable appliances not in bathroom
  • A few experiments will soon fine the most effective position
  • It Should be placed on floor wherever position in order to keep the lower level of the warm
  • It may be advantageous to place the heater in the coolest part of the room
  • Although the heater complies fully with safety standards
  • We do not recommended its use on very dipplile
  • Carpets or the long haired type rugs, always make sure that the heater on firm

Automatic Cut Out

  • An automatic cut-out is fitted to prevent damage due to over heating. If the heat outlet or the inlet of the tore the Cut-out will reset and permit the heater to switch again
  • Always disconnected the heater from the main before cleaning or removing any parts
  • One year warranty for manufacturing defect only.
 
Electric Blower Heater
Electric Blower Heater
Code :  EBH01
  • Pilot Light
  • During Overheating
  • Thermo State Cut-Off
  • Three Setting With OFF/ LOW / FAN
Electric Blower Heater
Electric Blower Heater
Code :  EBH02
  • Pilot Light
  • During Overheating
  • Thermo State Cut-Off
  • Three Setting With OFF/ LOW / FAN